Important Information Regarding your LFT Fiber Telephone Service
Your LFT Fiber telephone service is electrically powered and works with your existing telephones, telephone wires, and wall jacks. In the event of an electrical outage, your telephone service, just like any other electrically powered device in your home, including access to Emergency 9-1-1, may not function properly.
LFT Fiber provides a Backup Battery Unit (BBU) that is designed to provide temporary power, up to 8 hours or more, for your voice services when electrical power in your home or business is lost. An option for a 24-hour backup battery for voice services is also available upon request.
The BBU is connected directly to the ONT and is installed at your location in an area where it can be monitored. The BBU contains a series of indicator lights that tell you whether your service is being powered by your location's electricity or the BBU. The indicator lights also let you know when the 12-volt battery needs to be replaced. (see below illustration)
The length of time that your telephone will be available during a power outage depends on many variables, including, but not limited to the following: (i) whether or not the BBU remains properly installed; (ii) whether or not the BBU is properly charged; (iii) the condition and age of the BBU; and (iv) the amount of LFT Fiber telephone, internet and/or television utilization that you place on the BBU during an outage.
It is your responsibility to monitor the BBU. LFT Fiber does not guarantee the performance of the BBU. If you suspect that the BBU needs to be replaced, please contact us by calling 993-4237 (99- Fiber). For instructions on how to monitor the BBU status and to find other information about the BBU, please visit www.lftfiber.com.
Understanding and Monitoring Your LFT Fiber Backup Battery Unit
Battery Light Indicators:
1. Electricity On:
SOLID GREEN – Battery Valid
SOLID GREEN & RED – Battery Not Valid
1. Electricity Off:
BLINKING GREEN – Battery Valid
NO LIGHTS – Battery Not Valid
Restoring Your LFT Fiber Service Using a Generator
If you lose power but own a portable generator, you may be able to connect it to the LFT Fiber Optical Terminal Network (ONT) to temporarily restore your LFT Fiber services. The ONT is mounted on the outside wall of your home next to the electric meter.
1. If you have an LFT Fiber power adapter, it will be plugged into an indoor wall outlet; locate it. It is wired through the wall directly to the ONT and converts electric current from AC to DC.
2. Unplug the power adapter from the wall and plug it into the outlet or extension cord that will be powered by the generator. Check safety guidelines for using home generators inside the LFT Hurricane Handbook which can be obtained at LFT or City Hall.
3. Once your power is fully restored, plug the LFT Fiber power adapter back into the wall.
See below diagram for your home's ONT configuration:
